Nov 23, 2022 Hagyjon üzenetet

Detection Method Of Thermal Transfer Film

With The Rapid Development Of The Economy, People's Demand For Printed Matter Is Increasing Day By Day, And The Requirements For The Printing Quality Of The Product Are Also Increasing. The Film Has To Go Through Special Inspection Methods To Meet The Customer's Standards. Let's Learn About Several Special Inspection Methods For Thermal Transfer Films.


1.moderate Hot Stamping

According To The Material And Characteristics Of The Substrate, Select The Appropriate Thermal Transfer Machine And Hot Stamping Conditions For Hot Stamping. When The Thermal Transfer Film Is Transferred, The Pattern Transfer Can Be Complete, And The Degree Of Tightness Of The Peeled Base Film Is Moderate, Which Is Evaluated As Qualified, This Method Is Suitable For Hot Peeling And Cold Peeling Phenomena.


2.hot Stamping Discoloration

Corresponding To The Ironing Material Of Printed Products, Select Suitable Printing Equipment And Auxiliary Tools To Test, And If The Surface Of The Transferred Product Has No Obvious Discoloration, It Is Considered Qualified.


3.adhesion Test

Adhesion Is The Key Factor Affecting The Quality Of Thermal Transfer Film. It Is The Combination Of Thermal Transfer Pattern And Product Material To Achieve Close Interface Molecular Contact, Thereby Generating A New Interface Layer (adhesion).

Some Customers Have Some Special Requirements For Adhesion, And Require Tape Testing. Tape Testing Is Generally To Stick A Transparent Adhesive Tape On The Transfer Surface, Pull It Up At 45° Or 60° (specific Angle), Repeat Two To Three Times, And There Is No Falling Off Phenomenon, Judged To Be Qualified.


4.washing Test

The Product Needs To Make Some Samples For Washing Test Before Thermal Transfer, And The Standard Of Washing Test Should Be Determined According To The Requirements Of Customers. Under Normal Circumstances, Place The Workpiece And Wash It In Water For At Least 3 Times. After Washing, The Surface Of The Product Does Not Show Discoloration, Color Weakening, Pattern Falling Off, Warping, Etc., Which Is Considered Qualified.


5.alcohol Test

Alcohol Test Is Generally Divided Into Two Types: Alcohol Immersion Test And Alcohol Wipe Test. Next, I Will Briefly Introduce It For You.

A. Alcohol Immersion Test

Place The Hot Stamped Product In 65% Alcohol Solution For About 5 Minutes. When The Time Is Up, Take It Out. If There Is No Obvious Color Change On The Surface Of The Printed Product, The Color Is Weakened Or The Phenomenon Of Falling Off Is Evaluated As Qualified , Otherwise Unqualified.


B. Alcohol Wipe Test

Use Coarse Cotton Cloth Or Cloth Dipped In Industrial Alcohol, Keep The Cotton Cloth Moist, Press It On The Surface Of The Printed Product, Apply A Specific Pressure To Wipe Back And Forth, The Pressure And The Number Of Wipes Should Be Determined According To The Customer's Process Requirements.

Those Flower Films And Finished Products That Fail The Inspection Are Stored In The Waste Area Or Designated Area, And Are Marked For Subsequent Processing.


Ocbestjet Digital Technology Co., Ltd. Has More Than 20 Years Of Experience In The Printing Industry, And Is Very Strict In Product Quality Control. Our Products Include Toner Cartridges,ink, Ink Cartridges, Ciss, Chips And Decoders. They Are 100% Compatible With Epson, Canon, Hp, Lexmark, Brother,xerox,dell Printers Etc. We Are Committed To Insisting On The Philosophy Of "pragmatism, Innovation, Integrity And Communication". "forging Ahead And Advancing With The Times" Is The Core To Our Development. We Are Looking Forward To Working With You.


A szálláslekérdezés elküldése

whatsapp

teams

E-mailben

Vizsgálat